This website uses cookies. By continuing to browse this site you are agreeing to our use of cookies. Please review our Privacy Policy for more information.
Type II Safety Gas Cans
Type II Safety Gas Cans, AccuFlow
No Spill Gas Can
Go beyond protection and compliance with the added convenience of AccuFlow with Safe-Squeeze trigger for safe and controlled pouring.
Justrite's patented manifold and proportional flow-control Safe-Squeeze trigger provides you with the means to regulate the flow rate when handling flammable liquids. Fill port with ergonomic lift lever make filing easy. A flexible 9-inch (229-mm) long metal hose spout helps control the pour into small openings.
A Steel Gas Can Built for Safety
Made from high-grade coated steel, each can is pressure tested to ensure quality. The tough powder coat finish resists chemicals and stands up to demands of rigorous use. Stainless steel flame arrester— equipped in all Justrite safety cans — dissipates heat to stop flashback ignition. The sealed lid features automatic positive-pressure relief that vents between 3 and 5 psig (0.2 and 0.35 bar) to protect against explosion. A large label ID zone provides writing space to identify contents, department location, or individual user name. All can sizes have extra capacity for adding two-cycle engine oil or other additives.
Gas Can Color Codes
- Red: Gasoline
- Yellow: Diesel
- Blue: Kerosene
- Green: Oil
Can I interchange the hose size on a Justrite Type II safety can?
Yes. Justrite Type II safety cans are compatible with both 1-inch and 5/8-inch hoses, and the hoses are interchangeable. This allows users to select the hose size that best fits their dispensing application. Learn more about the parts of a Type II safety can. https://www.justrite.com/safety-cans-containers/design-parts-purpose
How can I increase the flow rate on a Justrite Type II safety gas can?
To increase flow on a Type II safety can, remove the hose and slightly loosen the screws on the spout assembly using a Phillips screwdriver. This adjustment can improve venting and allow fuel to dispense more smoothly. Be sure to follow manufacturer instructions and retighten components as needed for safe operation. Learn more about the parts of a Type II safety can. https://www.justrite.com/safety-cans-containers/design-parts-purpose
What is the difference between Type I and Type II safety cans?
Type I safety cans have a single opening that is used for both filling and dispensing. When filling Type I safety cans, using a funnel is recommended to help reduce spills.
Type II safety cans have separate openings, one for filling and a dedicated spout for dispensing, which allows for more controlled pouring. Justrite Type II safety cans typically include a flexible hose and controlled-pour features such as an AccuFlow manifold with a Safe-Squeeze trigger handle. Choosing a flammable safety can? Ask these questions first. https://www.justrite.com/news/5-questions-to-ask-when-choosing-safety-cans-for-flammables/
Why is there a brass fitting on the end of the safety can hose?
The ferrule on the end of the flexible hose is made from brass, a non-sparking material. The metal hose and brass fitting help maintain electrical continuity between containers, supporting proper bonding during dispensing and reducing static-related ignition risks. Learn more about the parts of a Justrite safety can. https://www.justrite.com/safety-cans-containers/design-parts-purpose